WiFi Password Correct But Not Connecting on Android or iPhone

Quick Answer

If your WiFi password is correct but your Android phone or iPhone still will not connect, first confirm that another device can join the same Wi-Fi network using the same credentials. Then forget the saved network and reconnect.

If only one phone fails while other devices connect normally, saved network data or phone-side settings become more relevant. If several devices are rejected, investigate the router. A router authentication or security-setting mismatch is possible, but the symptom alone does not prove that is the cause.

Choose the Symptom That Matches

What you seeWhat it may suggestFirst safe testNext step
Password is accepted, but the phone returns to “Saved” or “Not connected”Saved network data or authentication failureForget and reconnectFix 2
Phone says “Incorrect password” even though another device uses that passwordSaved credentials, wrong network, or authentication/security issueVerify the exact network name and passwordFix 1
Only one phone cannot joinPhone-specific configuration or compatibility becomes more relevantTry another Wi-Fi networkFix 4
Several devices suddenly cannot joinRouter configuration or router problem becomes more relevantRestart the routerFix 3
Problem started after router security settings changedAuthentication/security compatibility may be involvedReview the router’s security configurationFix 5
Phone cannot connect to any Wi-Fi networkDevice-side network configuration becomes more relevantTest another known-working Wi-Fi networkFix 6

A failed Wi-Fi connection does not automatically mean the password is wrong. Router availability, saved connection information, Wi-Fi security configuration, network access controls, and phone settings can also affect whether a device successfully joins a network.

1-Minute Safe Checks

Before resetting anything:

  1. Confirm that you selected the correct Wi-Fi network name.
  2. Remember that Wi-Fi passwords are case-sensitive.
  3. Move closer to the router.
  4. Turn Wi-Fi off and back on.
  5. Restart the phone.
  6. Test whether another device can join the same network.
  7. If possible, test your phone on another trusted Wi-Fi network.

Samsung specifically recommends checking the password carefully, restarting the phone and router, and comparing the connection with other networks or devices during Wi-Fi troubleshooting.

Do not factory-reset the phone or router at this stage.

Fix 1: Verify the Exact Network and Password

SAFE FIRST CHECK

Use This When

Use this when the phone reports:

  • Incorrect password
  • Authentication error
  • Couldn’t authenticate connection
  • Failed to connect
  • Saved, but does not connect

Why It May Help

Two nearby Wi-Fi networks can have similar names, and Wi-Fi passwords are case-sensitive. A saved password may also be outdated if the router password was changed.

Samsung’s current support documentation recommends checking the credentials and reconnecting to the intended Wi-Fi network.

Steps

  1. Look at the exact Wi-Fi network name on a device that already connects successfully.
  2. On the affected phone, select that exact network.
  3. Re-enter the password carefully.
  4. Check uppercase and lowercase letters.
  5. Check easily confused characters such as:
    • O and 0
    • I, l, and 1
  6. If you recently changed the router’s Wi-Fi password, use the new password.
  7. Try connecting again.

If you administer the router, you can also verify its current Wi-Fi credentials through the router manufacturer’s official app or management interface.

Do not change the Wi-Fi password merely to troubleshoot one phone unless you have confirmed that the existing credentials are unavailable or incorrect.

Expected Result

The phone should authenticate and join the network.

What the Result Means

  • The phone connects:
    The previous credentials or selected network may have been wrong.
  • Another device accepts the same password but your phone does not:
    The password itself becomes less likely to be the only problem. Continue with forgetting the saved network.
  • Several devices reject the same known-working credentials:
    Investigate the router or network configuration.
  • This comparison does not identify the exact router or phone fault by itself.

Fix 2: Forget the Wi-Fi Network and Reconnect

OFFICIALLY DOCUMENTED STEP

Use This When

Use this when the phone previously connected to the network or continues showing a saved network but refuses to join.

Why It May Help

Phones store information about networks they have previously joined. Forgetting the network removes that saved connection and allows the device to create a fresh Wi-Fi configuration when you reconnect.

Apple and Samsung both include reconnecting or forgetting a Wi-Fi network in their troubleshooting guidance.

Android

Exact menus vary by manufacturer.

Look for:

  1. Settings
  2. Wi-Fi, Internet, or Connections
  3. Select the affected network.
  4. Tap Forget or Forget network.
  5. Select the Wi-Fi network again.
  6. Enter the password.
  7. Tap Connect.

Samsung Galaxy

On supported Galaxy devices:

  1. Open Settings.
  2. Tap Connections.
  3. Tap Wi-Fi.
  4. Tap the settings icon beside the affected network.
  5. Tap Forget.
  6. Select the network again.
  7. Enter the password.
  8. Tap Connect.

Samsung documents this reconnect procedure in its current Galaxy Wi-Fi troubleshooting guide.

iPhone or iPad

If the network has previously been saved:

  1. Open Settings.
  2. Tap Wi-Fi.
  3. Open the information page for the affected network.
  4. Choose Forget This Network when available.
  5. Join the Wi-Fi network again.
  6. Enter the password.

Apple also notes that after router configuration changes, previously joined devices may need to forget and rejoin the network so they use the updated settings.

Expected Result

The phone should create a new connection instead of relying on its previous saved configuration.

What the Result Means

  • It connects afterward:
    Saved Wi-Fi information may have contributed to the problem.
  • It still rejects the connection:
    Continue by restarting both sides of the connection.
  • Forgetting a network does not prove that the router or phone was faulty.

Fix 3: Restart the Phone and Router

OFFICIALLY DOCUMENTED STEP

Use This When

Use this when the password has been verified and forgetting the network did not help.

Why It May Help

Restarting both devices can clear a temporary connection state without changing passwords, security modes, or other router configuration.

Apple and Samsung both recommend restarting Wi-Fi equipment during connection troubleshooting.

Steps

  1. Restart your phone.
  2. If you control the router, turn it off or disconnect its power.
  3. If you use a separate modem, restart it as well.
  4. Reconnect the equipment.
  5. Allow the router to finish starting.
  6. Turn Wi-Fi on on the phone.
  7. Select your network.
  8. Enter the password.
  9. Test the connection.

Important

Do not press the router’s recessed Reset, Factory Reset, or similar button.

Restarting the router and factory-resetting the router are different procedures. A factory reset can erase Wi-Fi names, passwords, ISP settings, and other configuration.

Expected Result

The phone should authenticate and remain connected.

What the Result Means

  • Several devices begin connecting normally:
    A temporary router-side problem may have contributed.
  • Every device still fails:
    Router configuration or network administration becomes more relevant.
  • Only one phone still fails:
    Continue with device-versus-network testing.

Fix 4: Test the Phone on Another Wi-Fi Network

DIAGNOSTIC TEST

Use This When

Use this before changing router security settings or resetting phone network settings.

Steps

  1. Leave the problem Wi-Fi network.
  2. Connect the phone to another trusted Wi-Fi network.
  3. Use that network’s correct credentials.
  4. Check whether the phone joins normally.
  5. Separately, test another device on your original Wi-Fi network.

Apple recommends comparing other devices on the same router and trying the affected device on Wi-Fi in another location when isolating connection problems.

What the Result Means

  • Your phone connects normally elsewhere:
    The original router or its configuration becomes more relevant.
  • Other devices connect to your router but your phone does not:
    A phone-specific configuration or compatibility problem becomes more relevant.
  • Several devices cannot join your router:
    Focus troubleshooting on the router.
  • Your phone cannot connect to any known-working Wi-Fi network:
    Phone-side network settings or a device problem become more relevant.
  • None of these tests proves a specific hardware failure.

Fix 5: Check Router Authentication and Security Settings

CONDITIONAL STEP

Use This When

Check router security configuration only when there is evidence pointing toward the router, such as:

  • The problem started after changing router security.
  • The router was recently replaced.
  • A new access point or mesh system was installed.
  • One device works on other Wi-Fi networks but repeatedly fails on this network.
  • Older and newer devices behave differently on the same network.
  • The router uses device access control or MAC filtering.
  • The phone reports authentication errors even after its saved network was removed.

A router authentication mismatch is therefore a possible cause, not a diagnosis based solely on the error message.

Why It May Help

Wi-Fi security settings control how a phone authenticates with the router. Devices and routers must use compatible authentication and encryption settings.

Apple’s current router guidance recommends WPA3 Personal where appropriate, WPA2/WPA3 Transitional for compatibility with older devices, or WPA2 Personal with AES when stronger supported modes cannot be used. Apple discourages older WPA, WEP, and TKIP configurations.

Before Changing Router Settings

If you own or manage the router:

  1. Back up its current configuration if the router supports backups.
  2. Record the existing settings.
  3. Check for router firmware updates.
  4. Use the router manufacturer’s instructions for your exact model.
  5. Do not copy arbitrary settings from an unrelated router.

Apple specifically recommends backing up existing router settings before making configuration changes.

Check the Security Mode

Look at the router’s Wi-Fi security setting.

For Apple-device compatibility, Apple’s current recommendations include:

  • WPA3 Personal for supported devices.
  • WPA2/WPA3 Transitional when compatibility with older devices is required.
  • WPA2 Personal (AES) when stronger modes cannot be used.

Apple advises against older configurations including:

  • WEP
  • WPA Personal
  • WPA/WPA2 mixed legacy modes
  • TKIP
  • Open or unsecured networks

Do not weaken a secure network merely to see whether the phone connects. Use the security configuration recommended by the router manufacturer and the devices that must use the network.

Check MAC Filtering or Access Control

Some routers can allow or reject devices according to their MAC address.

If this feature was recently enabled or modified, check whether the affected phone is being blocked.

Apple recommends disabling MAC-address filtering as an authentication or access-control mechanism and notes that Apple devices may use a different private Wi-Fi address for each network.

Check Multiple Router Bands

If your router provides multiple bands or access points, verify that their configuration is consistent.

Apple recommends consistent settings across a multiband Wi-Fi network and notes that inconsistent network names or configuration can affect connection reliability.

After correcting router settings:

  1. Save the configuration.
  2. Allow the router to restart if required.
  3. Forget the network on the phone.
  4. Rejoin it using the current password.
  5. Test again.

What the Result Means

The phone connects after correcting router security settings:
A router configuration or compatibility issue may have contributed.

Nothing changes:
Do not continue changing random router options. Restore known-good settings when necessary and proceed to targeted phone network troubleshooting.

Fix 6: Reset the Phone’s Network Settings

CONDITIONAL STEP

Use This When

Use a network reset only when:

  • The password has been verified.
  • The network has been forgotten and re-added.
  • The phone and router have been restarted.
  • Other devices can connect.
  • The phone continues having Wi-Fi connection problems.

Do not confuse a network-settings reset with a complete factory reset.

Samsung Galaxy

Samsung’s current US support instructions for Wi-Fi and Bluetooth network reset are:

  1. Open Settings.
  2. Tap General management.
  3. Tap Reset.
  4. Tap Reset Wi-Fi and Bluetooth settings.
  5. Tap Reset settings.
  6. Confirm when requested.
  7. Reconnect to Wi-Fi afterward.

Samsung notes that network-reset behavior varies across devices and software versions. Another official Samsung guide documents that network resets can remove Wi-Fi, mobile-data, and Bluetooth configuration on supported devices.

iPhone or iPad

Apple’s current procedure is:

  1. Open Settings.
  2. Tap General.
  3. Tap Transfer or Reset [device].
  4. Tap Reset.
  5. Tap Reset Network Settings.

Apple states that this removes saved Wi-Fi networks and passwords as well as cellular, VPN, and APN settings.

Make sure you know the Wi-Fi password before performing the reset.

Expected Result

The phone should rebuild its network configuration and allow you to create a fresh connection.

What the Result Means

  • The phone connects:
    Phone-side saved network settings may have been involved.
  • The phone still fails only on one router:
    Return to the router manufacturer or network administrator rather than repeatedly resetting the phone.
  • The phone cannot connect to multiple known-working networks:
    Manufacturer support or professional diagnosis may be appropriate.
  • A failed network reset does not prove that the phone’s Wi-Fi hardware is defective.

What Not to Do

  • Do Not Keep Re-entering the Password Indefinitely: Once another device has successfully joined the exact network with the same credentials, repeatedly typing the password provides little additional diagnostic value. Move to saved-network and router-versus-phone testing instead.
  • Do Not Disable Wi-Fi Security: Turning a network into an open network exposes it unnecessarily. Apple specifically discourages unsecured Wi-Fi configurations and outdated security protocols.
  • Do Not Switch to WEP or Old WPA Modes: Older security standards are not a good compatibility fix. Apple’s current guidance identifies WEP, WPA Personal, WPA/WPA2 legacy mixed modes, and TKIP as weak configurations that should be avoided.
  • Do Not Enter Random Static IP or DNS Values: This article covers failure to join/authenticate with Wi-Fi. IP and DNS troubleshooting belongs primarily to the stage after a device has successfully joined the network but cannot communicate correctly. If your phone already shows that it is connected to Wi-Fi but has no internet access, troubleshoot that as a different symptom.
  • Do Not Factory-Reset the Phone Yet: A factory reset erases data and is not justified as routine troubleshooting when one Wi-Fi network refuses an otherwise correct password. Use targeted network troubleshooting first.

Frequently Asked Questions

Why does WiFi say incorrect password when I know it is correct?

First verify that another device can join the exact same network with the same credentials. If it can, forgetting the network and reconnecting is a reasonable next step. If the phone works on other networks but continues being rejected by this particular router, router security, access control, or compatibility becomes more relevant. The incorrect-password message alone does not prove which component is responsible.

Can the router reject a correct WiFi password?

Yes. Knowing the correct password does not guarantee that every other requirement for joining the network is satisfied. Router security modes, device access controls, network configuration, and device compatibility can affect authentication. Apple documents security settings and MAC-based access controls as router settings that affect Wi-Fi connections.

Why does every other phone connect except mine?

That result makes a complete router outage less likely. Forget the network, restart the phone, test your phone on another Wi-Fi network, and then consider resetting only its network settings. If the phone fails on multiple known-working networks, contact the device manufacturer. Apple specifically recommends comparing other devices and testing another Wi-Fi network to isolate a device-specific problem.

Can WPA2 or WPA3 settings stop a phone from connecting?

Security configuration can affect compatibility and authentication. For Apple products, Apple currently recommends WPA3 Personal, WPA2/WPA3 Transitional where compatibility is needed, or WPA2 Personal with AES when stronger supported modes cannot be used. Exact support depends on the device and router. Do not blindly downgrade security. Follow current documentation for your router and device.

Should I reset my router?

Restarting the router is reasonable. A factory reset is different and should not be an early troubleshooting step because it can erase the router’s configuration. If router configuration appears responsible and you cannot safely identify the correct settings, contact the router manufacturer, ISP, or network administrator.

Official Sources

Official sources checked: August 9, 2026

Apple Support

Page: If you can’t connect to Wi-Fi on your iPhone or iPad

Direct verified URL: https://support.apple.com/en-ph/111786

URL status: Verified accessible on August 9, 2026

Supports:

  • Checking whether other devices can connect
  • Testing the affected device on another Wi-Fi network
  • Restarting the router and modem
  • Targeted network-settings reset
  • Data removed by Reset Network Settings
  • Escalation when a device cannot connect to any Wi-Fi network

Scope limitation:
Exact instructions apply to supported iPhone and iPad software. Router interfaces and Android procedures differ.

Apple Support

Page: Recommended settings for Wi-Fi routers and access points

Direct verified URL: https://support.apple.com/en-au/102766

URL status: Verified accessible on August 9, 2026

Supports:

  • Recommended Wi-Fi authentication and encryption settings
  • WPA3 Personal and WPA2/WPA3 Transitional guidance
  • WPA2 Personal with AES when stronger supported modes cannot be used
  • Avoiding WEP, legacy WPA, TKIP, and unsecured networks
  • MAC filtering and access-control guidance
  • Backing up router settings before configuration changes
  • Forgetting and rejoining networks after router changes

Scope limitation:
The router recommendations are written for networks used with Apple products. Other phones and routers require their manufacturer’s compatibility guidance.

Samsung Support

Page: Galaxy phone or tablet Wi-Fi connection issues

Direct verified URL: https://www.samsung.com/us/support/troubleshoot/TSG10002018/

URL status: Verified accessible on August 9, 2026

Supports:

  • Entering Wi-Fi credentials
  • Forgetting and reconnecting to a network
  • Restarting the router and mobile device
  • Wi-Fi and Bluetooth settings reset
  • Checking router or access-point configuration

Scope limitation:
Exact menus vary with Galaxy model, carrier, region, and One UI version.

Samsung Support

Page: How to troubleshoot a Galaxy phone that won’t connect to a Wi-Fi network

Direct verified URL: https://www.samsung.com/africa_en/support/mobile-devices/how-to-troubleshoot-a-galaxy-phone-that-wont-connect-to-a-wi-fi-network/

URL status: Verified accessible on August 9, 2026

Supports:

  • Restarting the Galaxy phone, router, and modem
  • Checking a case-sensitive Wi-Fi password
  • Resetting network settings
  • Testing whether the Wi-Fi problem affects the network or device

Scope limitation:
This regional Samsung page notes that screenshots and menus can vary by device model and software version.

How This Guide Was Verified

Last technically checked: August 9, 2026

Research method:
Official Apple and Samsung troubleshooting and Wi-Fi configuration documentation was opened and reviewed. Page titles, procedures, security guidance, warnings, and clean destination URLs were checked before output.

Physically tested: No documentation reviewed.

Applies to:
Android phones and iPhones that can see a Wi-Fi network but fail to join it even though the user believes the Wi-Fi password is correct.

Important limitation:
The message shown during a failed Wi-Fi connection does not establish a single root cause. Router authentication mismatch is a supported possibility only when the observed pattern points toward security, access-control, or router configuration issues.

Data-loss risk:
Conditional. Forgetting a Wi-Fi network removes its saved connection information. Network-settings resets remove additional network configuration depending on the phone. No full-device factory reset is recommended in this guide.

Final Steps

  • First verify the exact network and password with another device. Then forget the Wi-Fi network, reconnect, and restart the phone and router.
  • If the phone connects to other Wi-Fi networks but not this one, investigate the router’s authentication, security, and access-control settings using the router manufacturer’s instructions.
  • If other devices connect normally and the problem follows your phone across multiple networks, use a targeted network-settings reset before seeking manufacturer support.
  • Do not weaken Wi-Fi security, enter random network values, or factory-reset the phone simply because a correct password is being rejected.

Leave a Comment